Avago Technologies LSI SAS 3041E-R - Manual (Page 173)

Setup Utility Menu Screens 9-7
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Figure 9.2 Global Properties Menu
Table 9.3 describes the Global Properties menu fields.
9.3.4 Adapter Properties Menu
The Adapter Properties menu allows you to view and modify adapter
settings. It also provides access to all other menus.
Figure 9.3 shows the
Adapter Properties menu:
LSI Logic MPT Setup Utility v6.xx.xx.xx
Adapter List Global Properties
Pause When Boot Alert Displayed [Yes]
Boot Information Display Mode [Display adapters & installed devices]
Support Interrupt [Hook interrupt, the Default]
Restore Defaults
Esc = Exit Menu F1/Shift+1 = Help
Alt+N = Adapter List
Table 9.3 Global Properties Field Descriptions
Field Description
Pause When Boot
Alert Displayed Specifies whether the CU pauses for user acknowledgement after displaying
an alert message during boot. To continue after displaying an alert message,
specify No. To wait for the user to press any key after displaying a message,
specify Yes.
Boot Information
Display Mode Specifies how much adapter and device information the BIOS displays during
boot. Possible values are:
•
Display adapters only
•
Display adapters and all devices
•
Display minimal information
•
Display adapters & installed devices
Support Interrupt Allows you to prevent a hook on Int40, if required. Possible values are:
•
Hook interrupt (default)
•
Bypass interrupt hook
Press Enter when this option is selected to restore default settings for the
options listed on this menu.