Avago Technologies LSI SAS 3041E-R - Manual (Page 118)

6-20 Integrated RAID Configuration Utility
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Program Return Value –
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Specified adapter cannot be found.
Sample Output –
Here is an example of the status information returned when a volume
resynchronization is in progress:
Background command progress status for controller 0...
IR Volume 1
Current operation : Synchronize
Volume ID : 6
Volume status : Enabled
Volume state : Degraded
Physical disk I/Os : Not quiesced
Volume size (in sectors) : 70311936
Number of remaining sectors : 68250624
Percentage complete : 2.93%
Here is an example of the status information returned when no
background volume operation is in progress:
Background command progress status for controller 0...
IR Volume 1
Current operation : None
Volume ID : 6
Volume status : Enabled
Volume state : Optimal
Physical disk I/Os : Not quiesced
The status fields in the data displayed can have the following values:
Current operation – Synchronize or None
Volume status – Enabled or Disabled
Volume state – [Inactive] Optimal, Degraded or Failed
Physical disk I/Os – Quiesced or Not quiesced
6.3.16 VSIME Command
The VSIME command updates the IMEVolumeSettings field for an IME
volume type. If no IME volume ID is specified, the IMEVolumeSettings
field in Manufacturing Page 4 is updated with the new 8-digit hex value.
The new volume settings take effect at the next reboot or IOC reset. If a