Avago Technologies LSI SAS 3041E-R - Manual (Page 32)

2-10 Windows Driver Installation
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
limitations imposed by Windows XP, when attempting to Hibernate the
system may fail to Hibernate and display the following error message:
Windows - System Error Insufficient system resources exist
to complete the API.
To allow Windows XP to Hibernate successfully, all critical Windows
update patches should be applied to the system. These patches can be
downloaded at:
http://windowsupdate.microsoft.com
2.2.8 Troubleshooting
The SYMMPI.SYS driver logs error messages to the system error log. For
these errors, the system errorlog EventID is 11, and the specific error
code values are displayed at offset 0x10. Data is displayed in text format.
2.3 Windows Server 2003 Drivers
This section describes the LSI Fusion-MPT StorPort drivers for the
Windows Server 2003 operating system and explains how to install them.
There are three of the Windows Server 2003 drivers:
•
LSI_SCSI.SYS (StorPort) for U320 SCSI
•
LSI_FC.SYS (StorPort) for Fibre Channel
•
LSI_SAS.SYS (StorPort) for Serial Attached SCSI (SAS)
This section has the following topics:
•
Section 2.3.1, “Introducing the Windows Server 2003 Drivers”
•
Section 2.3.2, “Driver Features and LSI Device Support”
•
Section 2.3.3, “Preparing to Install the Windows Server 2003 Drivers”
•
Section 2.3.4, “Installing the Driver on a New Windows Server 2003
System”
•
Section 2.3.5, “Installing the Driver on an Existing Windows Server
2003 System”
•
Section 2.3.6, “Performance Tuning for Windows Server 2003”
•
Section 2.3.7, “Troubleshooting”