beautypg.com

6 troubleshooting, Troubleshooting, Section 3.4.6, “troubleshooting – Avago Technologies LSI SAS 3041E-R User Manual

Page 66

background image

3-26

UNIX Operating System Device Drivers

Version 1.3

Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.

m. Type q and press Enter to terminate the CD-ROM Configuration

Program menu.

n.

When you are prompted to create a new kernel, type y and
proceed to step

13

if this is the last device to add. Type n and

return to step

10

if you want to add more devices.

13. To rebuild the kernel, type the following on the command line:

/etc/conf/cf.d/link_unix

The following prompt appears:

Do you want this kernel to boot by default (y/n)?

14. Type y and press Enter. The system backs up the old kernel.

The following prompt appears:

Do you want the kernel environment rebuilt (y/n)?

15. Type y and press Enter.

16. Reboot the system by typing reboot and pressing Enter.

17. After the system reboots and the boot: prompt appears, press Enter

to load the new kernel.

18. Log in as usual.

3.4.6

Troubleshooting

The following conditions should exist after a successful installation:

The directory

etc/conf/sdevice.d

should contain a file named

lsil

. This file contains the

sdevice

entries.

The directory

etc/conf/cf.d

should contain the files

sdevice

,

mdevice

, and

mscsi

. Files

sdev.hdr

and

mdev.hdr

describe the

values of the possible field entries in the files

sdevice

and

mdevice

,

respectively.

The

sdevice

file should contain an

lsil

entry for each LSI host

adapter configured in the system.

The second field in the

sdevice

file should read Y.

An

lsil

entry should appear in the

mdevice

file.

An

lsil

entry for each configured device should appear in the

mscsi

file.