Avago Technologies LSI SAS 3041E-R User Manual
Page 65
SCO OpenServer 5 Device Driver Installation
3-25
Version 1.3
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
a.
Type mkdev cdrom at the command prompt and press Enter.
b.
When the CD-ROM Configuration Program menu appears, select
option 1 to install a CD-ROM drive and press Enter.
c.
When you are prompted to configure the CD-ROM drive, type y
and press Enter.
d.
When you are prompted for the identifier of the host adapter that
supports this device, type lsil and press Enter.
e.
When you are prompted for the host adapter that supports the
CD-ROM drive, type the host adapter number and press Enter.
(The host adapter number appears on the screen during boot-
up.)
If you are adding another LSI host adapter to the SCO UNIX
kernel, the system might prompt you to update the link-kit. If this
happens, type y and press Enter. If you entered the host adapter
number incorrectly, type n and press Enter. The system then
prompts for the host adapter identifier.
f.
When you are prompted for the bus number of the CD-ROM
drive, press Enter to accept the default (zero).
g.
When you are prompted for the ID of the CD-ROM drive, type
the ID number and press Enter. (The target ID number appears
on the screen during boot-up.)
h.
When you are prompted for the LUN of the CD-ROM drive, type
the LUN number and press Enter, or press Enter to accept the
default value of zero.
i.
When you are prompted to update the configuration file, type y
and press Enter. A prompt appears to configure a
CD-ROM/TAPE installation device. Unless you want to do this,
type n and press Enter.
j.
When the installation prompts you to configure a CD-ROM/TAPE
installation device, type n and press Enter.
k.
When you are prompted to add a High-Sierra file system, type y
and press Enter. The system displays the High Sierra/ISO9600
file system Configuration Program menu.
l.
Select option 1 to add High-Sierra and press Enter. The system
updates the configuration file and returns to the CD-ROM
Configuration Program menu.
- LSI SAS 3041X-R LSI SAS 3080X-R LSI SAS 3081E-R LSI SAS 31601E LSI SAS 3442E-R FusionMPT_DevMgrUG.pdf LSI SAS 3442X-R LSI SAS 3800X LSI SAS 3801E LSI SAS 3801X LSI SAS 3041X-R (Channel) LSI SAS 3080X-R (Channel) LSI SAS 3081E-R (Channel) LSI SAS 3442E-R (Channel) LSI SAS 3442X-R (Channel) LSI SAS 3800X (Channel) LSI SAS 3801E (Channel) LSI SAS 3801X (Channel) LSI20160 LSI20160 (Channel) LSI20320 LSI20320-R LSI20320-R (Channel) LSI20320IE LSI20320IE (Channel) LSI21320-R LSI21320-R (Channel) LSI22320-R LSI22320-R (Channel) LSI22320SE LSI22320SE (Channel) LSIU320 LSIU320 (Channel) LSI53C1020