Avago Technologies LSI SAS 3041E-R - Manual (Page 160)

8-22 SCSI EFI BIOS and Setup Utility
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Figure 8.10 Fibre Channel Device Properties: Part 2
Table 8.10 describes the fields in the Fibre Channel Device Properties
menu.
LSI Logic MPT Setup Utility Version vx.xx
Device Properties
SCSI Device Identifier DID Format Verify
ID
0 -
1 -
2 -
3 SEAGATE ST31055N 0000E4
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 LSIFC919X 0000EF
<< Scroll Indicator >>
Table 8.10 Fibre Channel Device Properties Field Descriptions
Field Description
SCSI ID The SCSI ID of the SCSI device.
Device Identifier The ASCII device identifier string from the device’s Inquiry Data.
World Wide Name The full World Wide Name of the device.
DID The Destination Identifier for the device.
Format Press Enter to low-level format the device. If enabled, this option allows low-
level formatting on a disk drive. Low-level formatting completely and
irreversibly erases all data on the drive. You cannot select this field for
Integrated Raid arrays. Formatting defaults the drive to a 512-byte sector
size, even if the drive was previously formatted to another sector size.
Verify Highlight this field and press Enter to verify all sectors on the device and to
reassign defective Logical Block Addresses (LBAs).
You cannot select this field for Integrated Raid arrays.