Avago Technologies LSI SAS 3041E-R - Manual (Page 38)

2-16 Windows Driver Installation
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
5. Click the plus sign to the left of the SCSI and RAID controllers line.
Double-click the entry for the adapter whose driver you want to
upgrade.
6. Click the Driver tab.
Information about the currently installed driver is displayed. You can
view more driver information by clicking the Driver Details button.
7. Click Update Driver to update the existing driver. The Hardware
Update Wizard starts.
8. Click Install from a list or specific location..., and then click Next.
9. Click Don’t search, I will choose the driver to install, and then
click Next.
10. Click Have Disk and type the path to the driver, or click Browse.
Drivers for 32-bit systems are in the \i386 directory. Drivers for IA-64
systems are in the \IA64 directory. Drivers for AMD64/EM64T
systems are in the \AMD64 directory.
11. When the path to the driver has been selected, click OK.
12. Select the driver from the list and click Next.
13. Click Next again to start the driver update.
In some cases, a message appears saying that this driver has not
passed logo testing—in other words, it is a nonsigned driver.
Note: Drivers are digitally signed by the Microsoft Windows
Hardware Quality Lab (WHQL) when they complete logo
testing. Due to the time lag between the LSI general
customer release of Windows drivers and the completion of
WHQL logo testing, some drivers distributed with adapters
or downloaded from the LSI web site may not be digitally
signed.
14. Click Continue Anyway to continue the installation, or click STOP
Installation if you do not want to install an unsigned driver.
The system loads the driver from the Windows Server 2003 driver
CD-ROM. A message box may appear indicating that the target
(existing) driver is newer than the source (upgrade) driver.
15. Click Yes to continue the installation, or click No to cancel the driver
upgrade.