Avago Technologies LSI SAS 3041E-R - Manual (Page 195)

Setup Utility Menu Screens 9-29
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Figure 9.16 View Array Screen
Table 9.13 describes the View Array screen fields.
9.3.12.4 Manage Array
The Manage Array screen is used to manage the current array, as shown
in
Figure 9.17 . If you select Manage Hot Spare, the utility displays a hot
spare management screen that has the same layout as the Create New
Array screen. If you select Synchronize Array, Activate Array, or Delete
LSI Logic MPT Setup Utility v6.xx.xx.xx
View Array -- SAS1068
Array 1 of 1
Identifier LSILOGICLogical Volume 3000
Type IM
Scan Order 1
Size(MB) 34332
Status Optimal
Manage Array
Slot Device Identifier RAID Hot Drive Pred Size
Num Disk Spr Status Fail (MB)
1 MAXTOR ATLAS15K2_36SAS BG34 Yes No Primary No 35074
2 MAXTOR ATLAS15K2_36SAS BG34 Yes No Secondary No 35074
8 MAXTOR ATLAS15K2_36SAS BG34 No Yes Hot Spare No 35074
Esc = Exit Menu F1/Shift+1 = Help
Enter=Select Item Alt+N=Next Array C=Create an array
Table 9.13 View Array Field Descriptions
Field Description
Array The number of the array.
Identifier The identifier of the array.
Type The RAID type of the array (IM or IS).
Scan Order The scan order of the array.
Size (MB) The size of the array.
Status The status of the array.
The definitions of Slot Num, Device Identifier, and the other fields are the same
as for the Create New Array screen.