Avago Technologies LSI SAS 3041E-R - Manual (Page 176)

9-10 Fusion-MPT SAS BIOS and Setup Utility
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Figure 9.4 SAS Topology Menu: Part 1
To expand the SAS Topology display, select an expander or enclosure
and press Enter to display all its PHYs/devices/bays. To collapse the
display, press Enter again.
While the cursor is on the Device Identifier:
•
Press Alt+E to access a specific Expander Properties menu or press
Alt+D to access a specific Device Properties menu.
•
Press Enter while on an expander or enclosure to expand or
collapse the display.
•
Press Enter while on a device to activate locate LED.
At any time, press C to clear Device Mappings for non-present devices.
Scroll the cursor to the right to display further information, as shown in
Figure 9.5 and Figure 9.6 :
LSI Logic MPT Setup Utility v6.xx.xx.xx
SAS Topology -- SAS1068
Device Identifier Discovery Device
SAS1068(03:03:00) Status Info
-PHY 0 FUJITSU MAV2036RC Good SAS
-PHY 1
-PHY 2
-PHY 3 SEGATE ST936701SS Good SAS
-PHY 4
-PHY 5 LSILOGICSASx12 A.0 Good Expander
-PHY 0 SAS1068(03:03:00)
-PHY 1
-PHY 2
-PHY 3 ATA Maxtor 6y080M0 1EW0 SATA
-PHY 4
-PHY 5
-PHY 6
-PHY 7
-PHY 8
-PHY 9
-PHY 10
-PHY 11
-PHY 7
Esc=Exit F1/Shift+1=Help Alt+M = More Keys
Alt+D= Device Properties Alt+E= Expander Properties