Avago Technologies LSI SAS 3041E-R - Manual (Page 213)

Configuration Utility Menu Screens 10-11
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Figure 10.5 Device Properties Menu
Table 10.6 describes the fields in the Fibre Channel Device Properties
menu.
LSI Logic PCI Configuration Utility Version FC MPTBIOS-x.xx
TID Device Identifier World-Wide Name DID Format Verify
0 SEAGATE ST31055FC 2000002037B9CD84:2100002037B9CD84 E4
1 - --------------------------------- -
2 - --------------------------------- -
3 - --------------------------------- -
4 - --------------------------------- -
5 - --------------------------------- -
6 - --------------------------------- -
7 - --------------------------------- -
8 - --------------------------------- -
9 - --------------------------------- -
10 - --------------------------------- -
11 - --------------------------------- -
12 - --------------------------------- -
13 - --------------------------------- -
14 - --------------------------------- -
15 LSIFC929 200000A0B8040B24:100000A0B8040B24 EF
<< Scroll Indicator >>
Table 10.6 Fibre Channel Device Properties Field Descriptions
Field Description
TID The device’s Target Identifier. For Fibre Channel, all target devices are assigned
a logical SCSI Bus and Target ID.
Device Identifier The ASCII device identifier string from the device’s Inquiry Data.
World Wide Name The full World Wide Name of the device.
DID The Destination Identifier for the device.
Format Press Enter to low-level format the disk drive (if the feature is enabled). Low-
level formatting completely and irreversibly erases all data on the drive.
Formatting defaults the drive to a 512-byte sector size, even if it was previously
formatted to another sector size.
Verify Highlight this field and press Enter to verify all sectors on the device and to
reassign defective Logical Block Addresses (LBAs).