Avago Technologies LSI SAS 3041E-R - Manual (Page 84)

4-6 NetWare Drivers
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
LSI NWPA driver and press Enter. Select Yes to save and
move the driver into the operating system. Press Enter to
copy the files.
Next, the system prompts you with the available command line
options to load the driver. A description of each option appears in the
box at the bottom of the installation screen. A more detailed
description is given in the section titled Command Line Options.
5. Modify any option values, as needed.
A description of each option appears in the box at the bottom of the
installation screen. A more detailed description is given in
Section
4.3, “Command Line Options.”
6. Load a separate instance of the driver for every LSI controller SCSI
channel or host adapter present in the system.
7. When prompted for a slot number, accept the slot numbers
displayed. Be sure to write these slot numbers down for later use.
8. When asked to edit the STARTUP.NCF file, be sure the LSIMPTNW.HAM
is loaded once per LSI controller SCSI channel. Add the following
statement to each load line in the
STARTUP.NCF , specifying the slot
numbers written down in the previous step, with only one slot number
per load instance:
SLOT=
The HAM driver(s) are loaded for each LSI controller SCSI channel
from the first LOAD statement to the last LOAD statement.
4.2.3 Reconfiguring Driver Options
Follow these steps to reconfigure driver options:
1. To unload all instances of the driver, type:
unload LSIMPTNW.HAM
2. To reload each instance of the driver with the desired option settings,
type:
load LSIMPTNW.HAM slot=
3. If the changes made to the load options of one or more load instance
are permanent, and the driver is loaded automatically at server boot
time, you must specify these options in the
STARTUP.NCF or
AUTOEXEC.NCF files.