Avago Technologies LSI SAS 3041E-R - Manual (Page 188)

9-22 Fusion-MPT SAS BIOS and Setup Utility
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
LUNs to Scan for
Block Devices
(Removable) Controls LUN scans for the following devices with removable media:
•
SCSI Device Type 00h - Direct Access
•
SCSI Device Type 04h - Write Once
•
SCSI Device Type 05h - CD-ROM
•
SCSI Device Type 07h - Optical
•
SCSI Device Type 0Eh - Simplified Direct Access.
LUN 0 Only: Scan only LUN 0.
All: Scan all LUNs.
LUNs to Scan for
Sequential
Devices Controls LUN scans for the following devices:
•
SCSI Device Type 01h - Sequential Access.
LUN 0 Only: Scan only LUN 0.
All: Scan all LUNs.
LUNs to Scan for
Other Devices Controls LUN scans for all devices other than the following:
•
SCSI Device Type 00h - Direct Access
•
SCSI Device Type 01h - Sequential Access
•
SCSI Device Type 04h - Write Once
•
SCSI Device Type 05h - CD-ROM
•
SCSI Device Type 07h - Optical
•
SCSI Device Type 0Eh - Simplified Direct Access.
LUN 0 Only: Scan only LUN 0.
All: Scan all LUNs.
Removable Media
Support
•
None: Install no Int13H interface for any Direct Access removable media
devices.
•
Boot Device Only: Install Int13H interface for a Direct Access removable media
device if, and only if, media is present in the device at the time of BIOS
initialization and either:
BBS System: The device is selected as the boot device. (Refer to the BIOS Boot
Specification for a description of BBS.)
Non-BBS System: The device is set up as the boot device. The adapter to which
the device is connected is specified as the first adapter (i.e., 0) in the Boot
Adapter List. The device is specified as the first device in the adapter’s device
scan order list.
•
With Media Installed: Install Int13H interfaces for Direct Access Removable
Media devices if media is present in the device at the time of BIOS initialization.
Restore Defaults Press Enter to restore the default values for all items on this screen.
Table 9.10 Advanced Device Properties Field Descriptions (Cont.)
Field Description