Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 47)

4-20 Description of Features
1503-UM054C-EN-P – June 2013
“Average Operations” Counter The Average Operations counter will include Average operations per
time period (selectable for hours, days or weeks), since a last reset
occurred (see “Operations Since” Counter section).
This parameter will calculate the average number of operations
(valid Close commands) between the last reset time and the
present RTC value. It can be viewed as an average over the
number of hours, days or weeks, between the last operations
reset time and the present RTC value.
An “Average Ops” Counter shall be provided for each of the IB units
in an MC configuration.
The Average Ops Counter will be viewable, for each of the five (5)
IB units, on DeviceNet in the following manner:
• ‘IB1 Average Operations per Time Unit =’ ‘Hour’ or ‘Day’ or ‘Week’
• ‘IB1 Average Operations Value =’ ‘0’ to ‘16777215’ (24 bit counter)
• ‘IB2 Average Operations per Time Unit =’ ‘Hour’ or ‘Day’ or ‘Week’
• ‘IB2 Average Operations Value =’ ‘0’ to ‘16777215’ (24 bit counter)
• ‘IB3 Average Operations per Time Unit =’ ‘Hour’ or ‘Day’ or ‘Week’
• ‘IB3 Average Operations Value =’ ‘0’ to ‘16777215’ (24 bit counter)
• ‘IB4 Average Operations per Time Unit =’ ‘Hour’ or ‘Day’ or ‘Week’
• ‘IB4 Average Operations Value =’ ‘0’ to ‘16777215’ (24 bit counter)
• ‘IB5 Average Operations per Time Unit =’ ‘Hour’ or ‘Day’ or ‘Week’
• ‘IB5 Average Operations Value =’ ‘0’ to ‘16777215’ (24 bit counter)
Set the time unit for the average operations on DeviceNet, as
follows:
‘IBx Average Operations per Time Units = ‘Hour’ or ‘Day’ or
‘Week’
This parameter will apply to all five of the ‘IBx Average Operations
value’ features.
As soon as this parameter is altered, all of the ‘IBx Average
Operations Value’ will be redisplayed with the new time units, when
selected.