Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 301)

B-126 Parameters
1503-UM054C-EN-P – June 2013
Trip Coil Open on IB1 [IB 1 Trip Coil Open]
Parameter Number:
243,201,159,117,74.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-57
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of Trip Coil Open
fault from the IB1 module. If the bit is ‘0’ then the warning is not
present. If the bit is ‘1’ then the warning is present. See Open Coil
Test in Chapter 4 for a detailed description of this warning.
Trip Coil Open on IB2 [IB 2 Trip Coil Open]
Parameter Number:
244,202,160,118,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-57
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of Trip Coil Open
fault from the IB2 module. If the bit is ‘0’ then the warning is not
present. If the bit is ‘1’ then the warning is present. See Open Coil
Test in Chapter 4 for a detailed description of this warning.
Trip Coil Open on IB3 [IB 3 Trip Coil Open]
Parameter Number: 245,203,161,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-3-57
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of Trip Coil Open
fault from the IB3 module. If the bit is ‘0’ then the warning is not
present. If the bit is ‘1’ then the warning is present. See Open Coil
Test in Chapter 4 for a detailed description of this warning.