Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 193)

B-18 Parameters
1503-UM054C-EN-P – June 2013
Contactor Relay Status for IntelliVAC Base Unit #5
[IB 5 Contactor Status Relay Status]
Parameter Number:
30,_,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-5-6
Group: Control
Units: -
Minimum Value: 0 = Open
Maximum Value: 1 = Closed
Default Value: 0
This parameter allows the user to view the status of the Contactor Status relay
for the IntelliVAC Basic Module #5. An Open refers to the Contactor Status
relay contacts being in an Open state. A Closed status refers to the Contactor
Status relay contacts being in a Closed state. See the Electrical Specifications
section in Table 1.A for the Contactor Status relay contact ratings.
Module Status Relay Status for IntelliVAC Base Unit #1
[IB 1 Module Status Relay Status]
Parameter Number:
31,25,19,13,7.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-7
Group: Control
Units: -
Minimum Value: 0 = Open
Maximum Value: 1 = Closed
Default Value: 0
This parameter allows the user to view the status of the Module Status relay
for the IntelliVAC Basic Module #1. An Open refers to the Module Status
relay contacts being in an Open state. A Closed status refers to the Module
Status relay contacts being in a Closed state. See the Electrical
Specifications section in Table 1.A for the Module Status relay contact
ratings.