Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 225)

B-50 Parameters
1503-UM054C-EN-P – June 2013
Real Time Clock Time [RTC Time]
Parameter Number: 89,77,65,53,40.
Access rule: Get/Set
Data Type: TIME_OF_DAY
Object Mapping: 0xB4-1-113
Group: Configuration
Units: Meters
Minimum Value: 0
Maximum Value: 0x05265BFF
Default Value: 0
This parameter allows the user to view and set the Time of Day on
the internal Real Time Clock.
To set/set this valve, please use RSNetWorx. For reference
0=00:00:00:00ms.
World Time Zone Selection [Time Zone Selection]
Parameter Number:
90,78,66,54,41.
Access rule: Get/Set
Data Type: SINT
Object Mapping: 0xB4-1-117
Group: Configuration
Units: -
Minimum Value: 0
Maximum Value: 32
Default Value: 13
This parameter allows the user to view and set the World Time Zone.
This is useful when the Event Log data is required in an area with a
different time zone than that in which the contactor is installed,
thereby allowing the correct time to be evaluated.
Table B.17 – RTC World Time Zone Selection Local
Value Enum Text Description
0 GMT -12:00 Greenwich Mean Time - 12 hours
1 GMT -11:00 Greenwich Mean Time - 11 hours
2 GMT -10:00 Greenwich Mean Time - 10 hours
3 GMT - 09:00 Greenwich Mean Time - 9 hours
4 GMT - 08:00 Greenwich Mean Time - 8 hours
5 GMT - 07:00 Greenwich Mean Time - 7 hours
6 GMT - 06:00 Greenwich Mean Time - 6 hours
7 GMT - 05:00 Greenwich Mean Time - 5 hours
8 GMT - 04:00 Greenwich Mean Time - 4 hours
9 GMT - 03:30 Greenwich Mean Time - 3.5 hours
10 GMT - 03:00 Greenwich Mean Time - 3 hours
11 GMT - 02:00 Greenwich Mean Time - 2 hours
12 GMT - 01:00 Greenwich Mean Time - 1 hour