Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 38)

Description of Features 4-11
1503-UM054C-EN-P – June 2013
Coil Currents The coil currents represent the average value of the particular coil
that is being controlled in each of the IntelliVAC Plus/MC units.
The coil current values for each of the five (5) IB units, shall be
made available on DeviceNet in the following manner:

‘IB1 Close Current = ‘ ‘xx.xxx’A (for electrically held or
mechanically latched)

‘IB2 Close Current = ‘ ‘xx.xxx’A (for electrically held or
mechanically latched)

‘IB3 Close Current = ‘ ‘xx.xxx’A (for electrically held or
mechanically latched)

‘IB4 Close Current = ‘ ‘xx.xxx’A (for electrically held or
mechanically latched)

‘IB5 Close Current = ‘ ‘xx.xxx’A (for electrically held or
mechanically latched)

‘IB1 Hold Current = ‘ ‘xx.xxx’A (for electrically held)

‘IB2 Hold Current = ‘ ‘xx.xxx’A (for electrically held)

‘IB3 Hold Current = ‘ ‘xx.xxx’A (for electrically held)

‘IB4 Hold Current = ‘ ‘xx.xxx’A (for electrically held)

‘IB5 Hold Current = ‘ ‘xx.xxx’A (for electrically held)

‘IB1 Contactor Coil Current = ‘xx.xxx’A (for electrically held
or mechanically latched)

‘IB2 Contactor Coil Current = ‘xx.xxx’A (for electrically held
or mechanically latched)

‘IB3 Contactor Coil Current = ‘xx.xxx’A (for electrically held
or mechanically latched)

‘IB4 Contactor Coil Current = ‘xx.xxx’A (for electrically held
or mechanically latched)

‘IB5 Contactor Coil Current = ‘xx.xxx’A (for electrically held
or mechanically latched)

‘IB1 Contactor Coil Current = ‘ ‘xx.xxx’A (for mechanically
latched only)

‘IB2 Contactor Coil Current = ‘ ‘xx.xxx’A (for mechanically
latched only)

‘IB3 Contactor Coil Current = ‘ ‘xx.xxx’A (for mechanically
latched only)

‘IB4 Contactor Coil Current = ‘ ‘xx.xxx’A (for mechanically
latched only)

‘IB5 Contactor Coil Current = ‘ ‘xx.xxx’A (for mechanically
latched only)
The ‘IBx Contactor Coil Current’ values are the real time currents
for each of the main coils (main single coil for the electrically held
contactor and the main coil for the mechanically latched contactor).
The ‘IBx Contactor Coil Current’ values are the real time currents
for each of the mechanically latched trip coils.