Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 45)

4-18 Description of Features
1503-UM054C-EN-P – June 2013

‘IB2 Reset Ops Since Counter’ (present ‘IB2 Ops Since 0
data/time’ saved to ‘IB2 Ops Since 1’ along with counter value
and ‘IB2 Ops Since 1 data/time’ saved to ‘IB2 Ops Since 2’
along with counter value) with ‘IB2 Ops Since’ counter = ‘0’

‘IB3 Reset Ops Since counter’ (present ‘IB3 Ops Since
data/time’ saved to ‘IB3 Ops Since 1’ along with counter value
and ‘IB3 Ops Since 1 data/time’ saved to ‘IB3 Ops Since 2’
along with counter value) with ‘IB3 Ops Since’ counter = ‘0’

‘IB4 Reset Ops Since counter’ (present ‘IB4 Ops Since
data/time’ saved to ‘IB4 Ops Since 1’ along with counter value
and ‘IB4 Ops Since1 data/time’ saved to ‘IB4 Ops Since 2’
along with counter value) with ‘IB4 Ops Since’ counter = ‘0’

‘IB5 Reset Ops Since counter’ (present ‘IB5 Ops Since
data/time’ saved to ‘IB5 Ops Since 1’ along with counter value
and ‘IB5 Ops Since 1 data/time’ saved to ‘IB5 Ops Since 2’
along with counter value) with ‘IB5 Ops Since’ counter = ‘0’
An “Operations Since” Counter is provided for each of the
IntelliVAC MC units in an MC configuration.
The Operations Since Counter parameters will be viewable, for each
of the five (5) IB units, on DeviceNet in the following manner:
 ‘IB1 Operation Since 0 Count Value =’ ‘0’ to ‘16777215’
(24 bit counter)
 ‘IB1 Operation Since 0 Date =’ ‘Month-Date-Year’
 ‘IB1 Operation Since 0 Time =’ ‘Hours-minutes-Seconds-10mS’
 ‘IB1 Operation Since 1 Count Value =’ ‘0’ to ‘16777215’
(24 bit counter)
 ‘IB1 Operation Since 1 Date =’ ‘Month-Date-Year’
 ‘IB1 Operation Since 1 Time =’ ‘Hours-minutes-Seconds-10mS’
 ‘IB1 Operation Since 2 Count Value =’ ‘0’ to ‘16777215’
(24 bit counter)
 ‘IB1 Operation Since 2 Date =’ ‘Month-Date-Year’
 ‘IB1 Operation Since 2 Time =’ ‘Hours-minutes-Seconds-10mS’
 ‘IB2 Operation Since 0 Count Value =’ ‘0’ to ‘16777215’
(24 bit counter)
 ‘IB2 Operation Since 0 Date =’ ‘Month-Date-Year’
 ‘IB2 Operation Since 0 Time =’ ‘Hours-minutes-Seconds-10mS’
 ‘IB2 Operation Since 1 Count Value =’ ‘0’ to ‘16777215’
(24 bit counter)
 ‘IB2 Operation Since 1 Date =’ ‘Month-Date-Year’
 ‘IB2 Operation Since 1 Time =’ ‘Hours-minutes-Seconds-10mS’
 ‘IB2 Operation Since 2 Count Value =’ ‘0’ to ‘16777215’
(24 bit counter)
 ‘IB2 Operation Since 2 Date =’ ‘Month-Date-Year’
 ‘IB2 Operation Since 2 Time =’ ‘Hours-minutes-Seconds-10mS’