Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 217)

B-42 Parameters
1503-UM054C-EN-P – June 2013
DeviceNet Media Access Carrier Identification
[DNet MAC ID]
Parameter Number: 77,65,53,41,28.
Access rule: Get/Set
Data Type: SINT
Object Mapping: 0x3-1-1
Group: Communication
Units: -
Minimum Value: 0
Maximum Value: 63
Default Value: 0
This parameter allows the user to view and set the MAC ID of the
DeviceNet communications network. The value can be anywhere in
the range of 0 to 63.
DeviceNet Media Access Carrier Identification Source
[MAC ID Source]
Parameter Number:
78,66,54,42,29.
Access rule: Get
Data Type: SINT
Object Mapping: 0x3-1-103
Group: Communication
Units: -
Minimum Value: 0 = MAC ID from Switch
Maximum Value: 1 = MAC ID from DNet
Default Value: 0
This parameter allows the user to view the source of the MAC ID for
the DeviceNet communications network. The value is defined by the
setting of the MAC ID switch settings. If the MAC ID switch setting
contains a value between 0 and 63, then this parameter will be set to
0. If the MAC ID switch setting contains a value greater than 63 (i.e.
64 to 99), then this parameter will be set to 1.