Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 124)

Chapter
9
1503-UM054C-EN-P – June 2013
DeviceLogix
DLX
– DeviceLogix refers to the integrated logic capability of the
IntelliVAC Plus.
IE
– IntelliVAC Enhanced (IntelliVAC Plus module) refers to the
module which contains both the IntelliVAC base module, and
IntelliVAC Plus boards.
IB
– IntelliVAC base module refers to a series E or later IntelliVAC
module with no additional circuit boards attached.
MC
– IntelliVAC Multi Contactor module refers to a module which
contains both the IntelliVAC base module and the IntelliVAC multi
contactor board.
Logical Masks
The purpose of the Logic Mask is to allow the user of the IntelliVAC
Plus the ability to prioritize control inputs arriving from different
sources i.e. local push-buttons/switches vs. direct network I/O
commands. This allows a structured approach as to where
commands may originate from. The logic mask defines and
prioritizes the source of the command inputs. There will be four
different types of masks provided.
Important Terms for Logical Masks
Commands -
The IntelliVAC Plus has 5 higher level commands
available for use. All commands are available regardless of the
number of IB modules connected, or the logic program which is
selected.
START
STOP
FORWARD
REVERSE
JOG
The commands can be triggered by any input source dependant on
the applied logical mask. Each command when given will execute
the appropriate control logic dependant on the logic loaded into
DeviceLogix.
Common Acronyms
and Short forms