Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 216)

Parameters B-41
1503-UM054C-EN-P – June 2013
Discrete Output Point Idle Value [DOP Idle Value]
Parameter Number: 75,63,51,34,26.
Access rule: Get/Set
Data Type: BOOL
Object Mapping: 0x1E-1-10
Group: Control
Units: -
Minimum Value: 0 = Off
Maximum Value: 1 = On
Default Value: 0
Dictates if any extra action will be performed on the existence of a
DOP idle condition.
Communication Parameters
DeviceNet Baud Rate [DNet Baudrate]
Parameter Number: 76,64,52,40,27.
Access rule: Get/Set
Data Type: SINT
Object Mapping: 0x3-1-2
Group: Communication
Units: -
Minimum Value: 0 = 125K
Maximum Value: 2 = 500K
Default Value: 2
This parameter allows the user to view and set the baud rate of the
DeviceNet communications network.
For each of the Baud Rate Values listed, the corresponding Baud
Rate is indicated.
Table B11 – DeviceNet Band Rate
Value Enum Text Description
0 125 K Baud Rate set to 125K
1 250 K Baud Rate set to 250K
2 500 K Baud Rate set to 500K