Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 183)

B-8 Parameters
1503-UM054C-EN-P – June 2013
Close Input Status from IntelliVAC Base Unit #5
[IB 5 Module Close Status]
Parameter Number:
10,_,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-5-2
Group: Control
Units: -
Minimum Value: 0 = Off
Maximum Value: 1 = On
Default Value: 0
This parameter allows the user to view the status of the contactor
Close input from the IntelliVAC Basic Module #5. An Off status
refers to the Close input having no input voltage indicating an
absence of a Close input. An On status refers to the Close input
having a valid input voltage indicating a presence of a Close input.
See the Electrical Specifications section in Table 1.A for the voltage
level for a valid Off and On input.
Open Input Status from IntelliVAC Base Unit #1
[IB 1 Module Open Status]
Parameter Number: 11,9,7,5,3.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-3
Group: Control
Units: -
Minimum Value: 0 = Off
Maximum Value: 1 = On
Default Value: 0
This parameter allows the user to view the status of the contactor
Open input from the IntelliVAC Basic Module #1. An Off status
refers to the Open input having no input voltage indicating the
absence of an Open input. An On status refers to the Open input
having a valid input voltage indicating the presence of an Open
input. See the Electrical Specifications section in Table 1.A for the
voltage level for a valid Off and On input.