Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 302)

Parameters B-127
1503-UM054C-EN-P – June 2013
Trip Coil Open on IB4 [IB 4 Trip Coil Open]
Parameter Number:
246,204,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-4-57
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of Trip Coil Open
fault from the IB4 module. If the bit is ‘0’ then the warning is not
present. If the bit is ‘1’ then the warning is present. See Open Coil
Test in Chapter 4 for a detailed description of this warning.
Trip Coil Open on IB5 [IB 5 Trip Coil Open]
Parameter Number:
247,_,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-5-57
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of Trip Coil Open
fault from the IB5 module. If the bit is ‘0’ then the warning is not
present. If the bit is ‘1’ then the warning is present. See Open Coil
Test in Chapter 4 for a detailed description of this warning.
Extended Close Time on IB1 [IB 1 Extended Pick up Time]
Parameter Number: 248,205,162,119,75.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-55
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of Extended Pick
up Time warning from the IB1 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Contactor Close Time, Extended Close Time & Tables 4.F &
4.G in Chapter 4 for a detailed description of this warning.