Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 282)

Parameters B-107
1503-UM054C-EN-P – June 2013
Power Up with Invalid DIP Switch Configuration on IB3
[IB 3 Power-up with Invalid DIP Switch Configuration]
Parameter Number: 200,167,134,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-3-30
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Power Up
with Invalid DIP Switch Configuration fault from the IB3 module. If
the bit is ‘0’ then the warning is not present. If the bit is ‘1’ then the
warning is present. See Power Up with Invalid DIP Switch
Configuration in Chapter 4 for a detailed description of this warning.
Power Up with Invalid DIP Switch Configuration on IB4
[IB 4 Power-up with Invalid DIP Switch Configuration]
Parameter Number: 201,168,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-4-30
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Power Up
with Invalid DIP Switch Configuration fault from the IB4 module. If
the bit is ‘0’ then the warning is not present. If the bit is ‘1’ then the
warning is present. See Power Up with Invalid DIP Switch
Configuration in Chapter 4 for a detailed description of this warning.