Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 99)

Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the spanning tree
status.
Bridge Info
General
Displays basic bridge information such as the LAN ID, bridge address, number of
ports and the bridge type.
Port
Displays basic bridge information on a per port basis such as the LAN ID, port
number, circuit, delay exceeded discards and MTU exceeded discards.
Note - The current firmware version returns a NULL value for the Circuit
parameter.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Note - Values entered for the Root Maximum Aging Time, Root Hello Time and
Root Forward Delay Time parameters must be multiples of 100. Values that are not
multiples of 100 will be automatically rounded down to the nearest hundreds.
Statistics
Displays statistics about frames received/transmitted on the switch's ports.
RMON Menu
From the RMON menu you can view and edit the RMON MIB.
Statistics
Standard
Displays traffic statistics in the network segment attached to each port.
Note - The current firmware version does not support RFC1757. As a result, Device
Manager will display the error message "Failed to get MIB data."
AlliedView™-EMS 4.0.1 Device Management Guide Page 99 of 411