Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 301)

Note
- The Traffic Class Priority parameter is not applicable to the AT-x600 series
and should be ignored.
Note - The Received Traffic Class parameter is implemented as 'read-only'.
Availability Menu
From the Availability menu, you can view the EPSR MIB.
EPSR
Displays the EPSR information of the device.
RMON Menu
From the RMON menu, you can view and edit the RMON MIB.
Statistics
Displays traffic statistics in the network segment attached to each port.
History Control Table
Displays the RMON History table.
Note - Device Manager does not handle MIB table with Read-Create access
correctly. Attempting to set any parameters of this table will not be successful.
Alarm Table
Displays the RMON Alarm table.
Event Table
Displays the RMON Event table.
Event Log
Displays the RMON Event log.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Standard
Displays high-capacity port statistics including received and transmitted
unicast/multicast/broadcast packets on the port, link up/down trap and port speed.
AlliedView™-EMS 4.0.1 Device Management Guide Page 301 of 411