Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 46)

IGMP Menu
From the IGMP menu, you can view and edit Internet Group Management Protocol
information such as IGMP queries and reports sent between devices and interfaces on
which IGMP is enabled.
MAC Multicast Info
Displays configurations of the enabling/disabling multicast.
IGMP Config
Displays configurations of the Internet Group Management Protocol function.
Security Menu
From the Security menu, you can view and edit different security and authentication
protocols SSL, SSH, and port-based authentication.
Authentication/Authorization/Accounting
Basic Info
Displays basic information about Authentication/Authorization/Accounting.
Note - The current firmware version does not allow the EAP Current Method List
parameter to be configured. Attempting to configure this parameter to any valid
value will result in the error "The error occurred with 'Set' operation.Error: gen
error".
Method Lists
Displays information about all method lists.
Note - The current firmware version does not allow the Row Status parameter to be
set to 'create and go' or 'destroy' as its value.
Lines
Displays information about all lines, their passwords and their authorization levels.
Note - The current firmware version does not allow Row Status parameter to be
configured. Attempting to configure this parameter to any valid value will result in
the error "The error occurred with 'Set' operation. Error: gen Error".
Note - The current firmware version does not allow the following parameters to be
configured on the implemented data type and range:
ƒ Method List Name Level 1
ƒ Method List Name Level 2
ƒ Method List Name Level 3
ƒ Method List Name Level 4
ƒ Method List Name Level 5
AlliedView™-EMS 4.0.1 Device Management Guide Page 46 of 411