Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 28)

AlliedView™-EMS 4.0.1 Device Management Guide Page 28 of 411
WEB Br
Connects to the switch's HTTP server.
Bridg
u, you can view and edit bridge information such as the spanning tree
status.
ing Database
Displays the Forwarding Database table as returned by the device.
Discard
Displays information about the device's aging time.
Spannin
Displays spanning tree parameters such as priority and cost.
ot Hello Time and
Root Forward Delay Time parameters must be multiples of 100. Values that are not
Statistic
Displays statistics about frames received/transmitted on the switch's ports.
Basic Br
Displays basic bridge information such as the LAN ID, bridge address, number of
the bridge type.
Bridge P
Displays basic bridge information on a per port basis such as the LAN ID, port
circuit, delay exceeded discards and MTU exceeded discards.
uit
parameter.
RMON Menu
u you can view and edit the RMON MIB.
Standard
isplays traffic statistics in the network segment attached to each port.
MIB
browser tool that allows you to issue an SNMP Set request on a specific table
element:
owser
e Menu
From the Bridge men
Forward
/Aging Time Info
g Tree Info
Note - Values entered for the Root Maximum Aging Time, Ro
multiples of 100 will be automatically rounded down to the nearest hundreds.
s
idge Info
ports and
ort Info
number,
Note - The current firmware version returns a NULL value for the Circ
From the RMON men
Statistics
D
Note - To collect statistical data on an interface, do the following using a