Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 116)

Channel Configuration
Displays ATM Channel configuration information.
Note - The current firmware version does not allow the following parameters to be
configured:
• Receive Traffic Descriptor Index
• Transmit Traffic Descriptor Index
Attempting to configure these parameters will result in the error message: "The
error occurred with 'Set' operation. Error: noSuchName."
Channel Error Statistics
Displays information about errors related to ATM channels.
ADSL Menu
From the ADSL menu, you can view ADSL interface information.
Line Info
Displays information about the ADSL line.
Physical Info
Displays information about the ADSL physical layer parameters.
Performance Statistics
Displays ADSL event counters.
Interval Statistics
Displays ADSL interval counters.
SHDSL Menu
From the SHDSL menu, you can view SHDSL interface information.
Status
Displays overall status information of the HDSL2/SHDSL spans.
Performance
Displays status and performance information for segment endpoints in
HDSL2/SHDSL Lines.
Line Configuration
Displays span configuration profiles for SHDSL lines.
Alarm Configuration
Displays alarm configuration profiles for HDSL2/SHDSL segment endpoints.
AlliedView™-EMS 4.0.1 Device Management Guide Page 116 of 411