Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 263)

Statistics
Displays statistics about frames received/transmitted on the switch port.
High Capacity Ports
Displays statistics about frames received/transmitted on high capacity ports.
Note - The current firmware version returns 'noSuchName' for the Received
Frames, Transmitted Frames and Discarded Frames parameters.
Overflow Counters
Displays statistics for the high capacity interfaces of a transparent bridge.
802.1p
Config
Displays information on 802.1p such as Device Capabilities, GMRP Status and if
Traffic classes are enabled.
Note - The current firmware version returns 'noSuchName' for the GMRP Status
parameter.
Port Capabilities
Displays port capabilities associated with this bridge.
GMRP
Displays the list of GARP Multicast Registration Protocol control and status
information for every bridge port.
Note - The current firmware version returns 'noSuchName' for the GMRP Status,
Failed Registrations and Last PDU Origin parameters.
GARP
Displays Generic Attribute Registration Protocol control for a bridge port.
Note - The current firmware version does not allow the Join Time, Leave Time and
Leave All Time to be configured.
IGMP Menu
From the IGMP menu, you can view and edit IGMP information such as IGMP queries and
reports sent between devices, VLAN's IGMP functions and interfaces on which IGMP is
enabled.
IGMP Config
Displays configurations of the Internet Group Management Protocol function.
Note - IGMP Config parameters cannot be configured when the Row Status
parameter under IGMP -> MGMD Management -> Router Interface Info is set to
'active'.
AlliedView™-EMS 4.0.1 Device Management Guide Page 263 of 411