Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 241)

Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Note - The current firmware version does not allow the Spanning Tree parameter to
be configured when the Spanning Tree Version is set to 'MSTP'.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays statistics about frames received/transmitted on the switch port.
Note - L3 Models: The current firmware version returns the value 'NULL' for the
Circuit parameter.
Security Menu
From the Security menu, you can view and edit security protocols such as the ACL.
Access Control List
Displays the Access Control List table as returned by the device.
Note - The current firmware version allows up to 31 characters for the Description
parameter.
Note - The current firmware version does not allow the Port List parameter to be
configured to any valid port number when using an AT-9424Ts, AT-9424Ts/XP and
AT-9448Ts/XP device models.
Note - The current firmware version does not return any Set Error for the AT-
9424Ts, AT-9424Ts/XP and AT-9448Ts/XP device models when configuring the
Port List parameter to null.
Note - L3 Models: The current firmware version does not return any Set Error when
configuring the Port List parameter to invalid values.
Note - L3 Models: The current firmware version does not return any Set Error when
configuring the Row Status parameter to 'not in service'.
Note - L3 Models: The current firmware version does not return any Set Error when
configuring the Classifier List parameter to invalid values.
AlliedView™-EMS 4.0.1 Device Management Guide Page 241 of 411