beautypg.com

Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT User Manual

Page 310

background image



Hardware Info

Total Expansion Modules Installed

Displays the number of expansion modules installed in the device.

Installed Modules Info

Displays information about the expansion modules installed in the device.

Note

- The current firmware version does not allow the Board Bay parameter to be

configured. Attempting to configure this parameter to any valid value will result in

the error "The error occurred with 'Set' operation. Error: gen error".


Firmware Info

Current Firmware

Displays information about the current software version installed in the device.

Note

- Configuring the Save Current Software parameter to values greater than its

valid range will be accepted but will cause the device to restart intermittently.

Note

- The current firmware version allows the Save Current Software parameter to

be set to a 'null' value. However, the Save Current Software parameter will always

return 'saving (null)' value and will not be configurable unless the switch is restarted.

Note

- The SNMP agent may take awhile to respond if the Save Current Software

parameter has been set to 'saving'. When this happens, it may take a while for device

information to be displayed in Device Manager.

Next Boot Firmware

Displays the version of the firmware that the device is currently set to boot from

and its full path.

Backup Firmware

Displays the backup software version and its path in the device.


Software License Info

Base License

Displays information about the installed base software licenses on the device.

Installed Licenses

Displays information about the software licenses installed on the device.

Note

- The current firmware version returns inconsistent values for the Index and

Stack ID parameters.

Note

- Configuring the Row Status parameter to 'destroy' as its value will result to

an error message "The error occurred with 'Set' operation. Error: time out

occurred". However, the value is still set successfully.


AlliedView™-EMS 4.0.1 Device Management Guide

Page 310 of 411