Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 294)

Note - Configuring the Save Current Software parameter to values greater
than its valid range will be accepted but will cause the device to restart
intermittently.
Note - The current firmware version allows the Save Current Software
parameter to be set to a 'null' value. However, the Save Current Software
parameter will always return 'saving (null)' value and will not be configurable
unless the switch is restarted.
Note - The SNMP agent may take awhile to respond if the Save Current
Software parameter has been set to 'saving'. When this happens, it may take
a while for device information to be displayed in Device Manager.
Next Boot Firmware
Displays the version of the firmware that the device is currently set to boot
from and its full path.
Backup Firmware
Displays the backup software version and its path in the device.
Software License Info
Base License
Displays information about the installed base software licenses on the device.
Installed Licenses
Displays information about the software licenses installed on the device.
Note - The current firmware version returns inconsistent values for the Index and
Stack ID parameters.
Note - Configuring the Row Status parameter to 'destroy' as its value will result to
an error message "The error occurred with 'Set' operation. Error: time out
occurred". However, the value is still set successfully.
Features Info
Displays information about the feature licenses installed on the device.
Install New License
Allows the user to install a new license on the device.
Note - Configuring the Name and Key parameters to value 'NULL' will cause the
device to restart intermittently.
Note - The SNMP agent may take awhile to respond if the Name and Key
parameters have been set to value 'NULL'. When this happens, it may take a while
for device information to be displayed in Device Manager.
AlliedView™-EMS 4.0.1 Device Management Guide Page 294 of 411