Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 327)

Ping Polling
Ping Status
Displays the status of the Ping polling.
Note - Since the Address parameter cannot be configured, the Ping Status parameter
cannot also be configured.
Ping Parameters
Displays basic information of the Ping module.
Note - The current firmware version accepts values in the range [1-4294967595]
inclusive for the Number of Packets and Time Interval parameters.
Note - Valid MIB Set values for the Timeout parameter should range from 1 to
65535. However, the current firmware version allows the user to enter values in the
range [-65535 to -1, 1 to 65535] inclusive. Attempting to enter values greater than
65535 will cause the new value to be converted to its equivalent wrap-around value;
i.e., 65536 will become 0, 65537 will become 1, and so on.
Note - Valid MIB Set values for the Number of Packets parameter are in the range
[1-4294967295] inclusive. However, attempting to enter values greater than
2147483647 will cause the new value to be converted to its equivalent wrap-around
value; i.e., 2147483648 will become -2147483648, 2147483649 will become -
2147483647, and so on.
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Address parameter will not be configurable and will display a
sequence of bytes in hexadecimal format instead of the actual destination of ping
packets.
Ping Statistics
Displays statistics of the Ping polling.
Reset Cold
Initiates a cold restart on the switch.
Reset Warm
Initiates a warm restart on the switch.
Reset Info
Displays information about the restart.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Opens your web browser and connects to the switch's HTTP server.
AlliedView™-EMS 4.0.1 Device Management Guide Page 327 of 411