Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 153)

MAC Address Security
Displays MAC Address Security parameters and allows you to set the security level
for dynamic and static MAC addresses learned and assigned to a port.
Intrusion Attack
Displays the VLAN ID and the MAC Address of each port.
Note - The VLAN ID and MAC Address parameters do not return valid values. They
return "noSuchName.", "No such instance" or NULL.
DoS Defense
Displays DoS Defense parameters and allows you to enable/disable a defense
mechanism on a port.
Note - The Module ID and Port Number parameters under each Attack Type option
do not return valid values. They return "noSuchName.", "No such instance" or
NULL.
Note - The Attack Mirror Port parameter under each Attack Type option is already
obsolete and should be ignored.
Note - The Attack Mirror Port Status parameter is not applicable to the SYN Flood
and Smurf defenses and should be ignored.
Stacking Menu
From the Stacking menu, you can access slave switches and other Master switches in the
enhanced stack.
Stacking Info
Displays Enhanced Stacking parameters, allows you to set the switch's enhanced
stacking status and select a switch to manage in the enhanced stack.
Expansion Module Notes
• When adding/removing/changing an expansion module, Device Manager does not
automatically refresh the device image in the main window to reflect the
addition/removal/change. To view the updated device image, click on the Refresh
option under the Agent menu.
• The Port Speed and Mode parameter of the 100Base-FX port on the AT-A45/SC,
AT-A45/SC-SM15 and AT-A45/MT expansion modules can only be set to '100Mbps
full-duplex'.
AlliedView™-EMS 4.0.1 Device Management Guide Page 153 of 411