Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 60)

Device Info
General Info
Displays common management information.
Active Software File
Displays the currently available images on the flash.
Physical Description
Basic Info
Displays the number of stack units.
Module Info
Displays module information for each unit in the system.
Port Attributes
Displays port information.
Stack Info
Displays information about the stacked devices.
Stack Active Unit ID
Displays the current unit ID of the device after reset.
Note - AT-8000S/16: The current firmware version allows the Active Unit ID
After Reset parameter to be configured but the value is not saved after it is
rebooted.
Power Supply Info
Displays information about the power supply and redundant power supply.
Fan Info
Displays fan status.
Unit General Info
Displays the device's software versions.
Note - The current firmware version accepts up to 160 characters for the
Serial Number and Asset Tag parameters but truncates them to 31 and 16
characters respectively.
Note - The current firmware version is unable to display any value for the
Service Tag parameter.
Unit Environment Info
Displays the device's main power supply and temperature status.
AlliedView™-EMS 4.0.1 Device Management Guide Page 60 of 411