Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 181)

Note - The current firmware version returns a 'noSuchName' value for the Port
Alias and Counter Discontinuity Time parameters.
Detail Info
Duplex Mode
Displays the duplex mode of the ports.
Bandwith Limits
Displays bandwidth limits of the switch ports.
Error Statistics
Displays error statistics.
Note - The following parameters are not applicable to the AT-8948 and should be
ignored:
ƒ Ethernet Chip Set
ƒ Symbol Errors
ƒ Duplex Status
Spanning Tree Info
Displays the port's spanning tree parameters.
MAU Info
Displays interface-related MAU information for the port.
Note - The MAU Type List Bits and HC False Carriers parameters are not applicable
to the AT-8948.
Note - The MAU Status and Default MAU Type parameters are implemented as
'read-only'.
MAU Negotiation Info
Displays the MAU's auto-negotiation settings and its status.
Note - The following parameters are not applicable to the AT-8948 and should be
ignored:
ƒ Capability Bits
ƒ Advertised Bits
ƒ Received Bits
ƒ Remote Fault Advertised
ƒ Remote Fault Received
Note - The Administration Status, Advertised Negotiation Capability and Restart
parameters are implemented as 'read-only'.
AlliedView™-EMS 4.0.1 Device Management Guide Page 181 of 411