Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 320)

MAC Control Pause
Displays information about the MAC Control Pause function on a single ethernet-
like interface.
Note - The current firmware version returns a 'noSuchName' value for the Received
Frames (HC) and Transmit Frames (HC) parameters.
Note - The PAUSE Config parameter is implemented as 'read-only'.
MAU Info
Displays interface-related MAU information for the port.
Note - The MAU Status and Default MAU Type parameters are implemented as
'read-only'.
Note - The MAU Type List parameter is not applicable to the AT-x900-12X series
and should be ignored.
Note - The Mau Type List Bits and HC False Carriers parameters are not applicable
to the AT-x900-12X series and should be ignored.
Note - The current firmware version returns the value 'NULL' for the MAU Type
and Default MAU Type parameters.
MAU Negotiation Info
Displays the MAU's auto-negotiation settings and its status.
Note - The Administration Status and Restart parameters are implemented as 'read-
only'.
Note - The Advertised Negotiation Capability parameter is not applicable to the AT-
x900-12X series and should be ignored.
Note - The Negotiation Capability, Advertised Negotiation Capability and Received
Negotiation Capability parameters are not applicable to the AT-x900-12X series and
should be ignored.
Note - The following parameters are not applicable to the AT-x900-12X series and
should be ignored:
ƒ Capability Bits
ƒ Advertised Bits
ƒ Received Bits
ƒ Remote Fault Advertised
ƒ Remote Fault Received
AlliedView™-EMS 4.0.1 Device Management Guide Page 320 of 411