Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 328)

Note - The web browser can only contact the device if the device has a valid
resource file loaded and set, and the HTTP server and GUI on the device are
enabled.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
IP
ARP Table
Displays the ARP cache on the switch.
Note - The Physical Address and Mapping Type parameters are implemented as
'read-only'.
Address Table
Displays the list of IP interfaces on the switch.
Route Number
Displays the IP routing number on the switch.
Route Table
Displays the IP routing table on the switch.
Note - The current firmware version returns the value 'NULL' for the Routing
Protocol MIB parameter.
Note - The following parameters are implemented as 'read-only':
• Destination Port Number
• Routing Type
• Next Hop AS Number
• Destination Metric 1
• Destination Metric 2
• Destination Metric 3
• Destination Metric 4
• Destination Metric 5
• Row Status
IP Statistics
Displays statistics about IP, such as the number of IP datagrams received.
UDP
Listener Info
Displays UDP listener information.
AlliedView™-EMS 4.0.1 Device Management Guide Page 328 of 411