Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT User Manual
Page 355
Device Manager LEDs for the SwitchBlade x908
LED
State
Description
PWR 1
Green
Gray
The Power Supply Unit (PSU) is installed and functioning in the PSU bay
1.
The Power Supply Unit (PSU) is either not installed or not functioning
in the PSU bay 1.
PWR 2
Green
Gray
The Power Supply Unit (PSU) is installed and functioning in the PSU bay
2.
The Power Supply Unit (PSU) is either not installed or not functioning
in the PSU bay 2.
FAN 1
Green
Gray
The fan module is installed and functioning in the Fan bay 1.
The fan module is either not installed or not functioning in the Fan bay
1.
FAN 2
Green
Gray
The fan module is installed and functioning in the Fan bay 2.
The fan module is either not installed or not functioning in the Fan bay
2.
STACK ID Green
Gray
Orange
The stacked unit is either the Stacking Master or the Backup Master.
The switch is set to standalone mode.
The stacked unit is a slave switch.
Note
- Please refer to Uplink Modules for the operations and behavior of the Expansion
Modules installed on the chassis.
Note
- The current firmware version does not allow Device Manager to support the FAN
LEDs.
Note
- The current firmware version does not allow Device Manager to detect the presence
or absence of an SFP module in any of the SFP slots. As a result, the SFP slots on the uplink
module image will always show SFP images regardless of whether or not SFP modules are
physically present in the slots.
Note
- The current firmware version does not allow Device Manager to detect the presence
or absence of an XFP module in any of the XFP slots. As a result, the XFP slots on the
uplink module image will always show XFP images regardless of whether or not XFP
modules are physically present in the slots.
Note
- When the Spanning Tree Status parameter is set to 'enabled', the current firmware
version continues to return a value of 'forwarding' for the Port State parameter of blocking
ports. As a result, blocking ports will remain green and will not turn to yellow.
AlliedView™-EMS 4.0.1 Device Management Guide
Page 355 of 411