Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 72)

RADIUS
Basic Info
Displays basic RADIUS information.
RADIUS Server Info
Displays the IP address, UDP port number for authentication and accounting
request, and current status of the RADIUS server.
Note - The current firmware version does not allow the Usage parameter to be set
to 'wireless authentication'.
Authentication Client Info
Displays the number of RADIUS Access-Response packets received from unknown
addresses and the identifier of the RADIUS authentication client.
Note - The current firmware version is unable to display any value for the Client ID
parameter.
Authentication Server Info
Displays the list of RADIUS authentication servers with which the client shares a
secret.
Accounting Client Info
Displays the number of RADIUS Access-Response packets received from unknown
addresses and the identifier of the RADIUS accounting client.
Note - The current firmware version is unable to display any value for the Client ID
parameter.
Accounting Server Info
Displays the list of RADIUS accounting servers with which the client shares a secret.
TACACS+
Basic Info
Displays basic TACACS+ information.
TACACS+ Server Info
Displays information about TACACS+ server.
Secure Shell
SSH Server
Displays information about the status of public key authentication and the type of
regenerated host key.
Note - Configuring the Regenerate Host Key parameter will result in the error
message: "The error occurred with 'Set' operation. Error: time out occurred" but a
key will still be successfully generated.
AlliedView™-EMS 4.0.1 Device Management Guide Page 72 of 411