Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 356)

Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log
into the CLI using Telnet.
System Info
Standard
Displays basic system information, including system name, location, contact and
description.
Note - Valid MIB Set values for the System Contact and System Location parameters
are up to 255 characters. Attempting to enter values greater than the valid range
will be accepted but values exceeding 255 characters will be truncated.
Note - Valid MIB Set values for the System Name parameter is up to 255 characters.
However, values exceeding 64 characters will be truncated.
Note - The current firmware version allows the System Name parameter to be set
to 'NULL'. However, attempting to set this parameter to value 'NULL' will set it to
its default value 'awplus'.
Enterprise
CPU Utilization
Displays information about the CPU utilization over different periods of time.
Fan Speeds
Displays information about fans installed in the device that have their fan
speeds monitored by environment monitoring hardware.
Voltage Rails
Displays information about voltage rails in the device that are monitored by
environment monitoring hardware.
Temperature Sensors
Displays information about the temperature monitored by the temperature
sensors in the device.
Power Supply Bays
Displays information about the Power Supply Bays in the system and info on
any devices that are present.
Power Supply Bay Sensors
Displays information about device installed in the Power Supply Bay.
LED Faults
Displays information about the LEDs on the device.
AlliedView™-EMS 4.0.1 Device Management Guide Page 356 of 411