Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 191)

Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Port Tx Enable parameter will display a sequence of bytes in
hexadecimal format instead of the actual input value.
Note - The current firmware version returns the value 'NULL' for the OID
parameter.
Availability Menu
From the Availability menu you can view and edit Server Load Balancing and Ping Polling
information.
Server Load Balancing
General Info
Displays basic server load balancing information.
Resources
Displays server load balancing resources information.
Resource Pools
Displays server load balancing resource pools information.
Virtual Balancers
Displays virtual balancers information.
Affinity Tables
Displays load balancer affinities information.
Open TCP Connections
Displays open TCP connections information.
Ping Polling
Ping Status
Displays the status of the Ping polling.
Note - The current firmware version only allows the Ping Status parameter to be
configured if Protocol parameter under Ping Parameters is set to OSI.
Ping Parameters
Displays basic information of the Ping module.
Note - Valid MIB Set values for the Timeout parameter should range from 1 to 60.
However, the current firmware version allows the user to enter values in the range
[-9223372036854775808 to -1, 1 to 9223372036854775807] inclusive. But
attempting to enter values greater than 65535 will cause the new value to be
converted to its equivalent wrap-around value; i.e., 65536 will become 0, 65537 will
become 1, and so on.
AlliedView™-EMS 4.0.1 Device Management Guide Page 191 of 411