Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 107)

Note - When a port on the AT-9410GB is set to 'auto sense' and is connected to a half-
duplex port on another device, its corresponding Duplex LED on the device image turns
green instead of orange.
Note - A GBIC image is always visible on each of the GBIC slots of the device image even if
there are no GBICs physically inserted.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log
into the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - The current firmware version does not allow the user to enter multiple-word
values for the System Name parameter.
Note - Device Manager allows the user to enter up to 255 characters for the System
Contact, System Name, and System Location parameters but truncates them to 64
characters.
Firmware Info
Displays firmware version.
Network Info
Displays network-related information such as the addresses of the default gateway
and the agents.
Note - The current firmware version does not save changes made to the DNS
Server and the Default Domain Name parameters.
Manager Address Info
Displays the IP address of the management station.
Device Info
Displays general information about the switch.
Note - The Security Action parameter returns '???(0)' when the Security
Configuration parameter is set to 'disabled'.
DHCP Info
Displays DHCP information including the DHCP System Group and DHCP Timer
Group.
AlliedView™-EMS 4.0.1 Device Management Guide Page 107 of 411