Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 262)

Note - If the MD5 Key parameter is set to a new value whose length is shorter than
the length of the previously active MD5 Key, an extra character, as well as the
remaining characters of the previous key, is appended to the new value.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database, discard/aging time information, spanning tree status and 802.1p.
Forwarding Database
Note - A user account assigned a MIB view that excludes a row or multiple rows
from the Forwarding Database table will not be allowed to view the table at all.
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a port
or group of ports to view its corresponding Forwarding Database entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
STP Global Settings
Displays spanning tree parameters such as status and version.
MSTP Instance Info
Displays information about the Multiple Spanning Tree Protocol instance.
Note - The current firmware version does not allow the following parameters to be
configured:
ƒ VLAN Range List 1 - 64
ƒ VLAN Range List 65 - 128
ƒ VLAN Range List 129 - 192
ƒ VLAN Range List 193 - 256
ƒ VLAN Range List 257 - 320
ƒ VLAN Range List 321 - 384
ƒ VLAN Range List 385 - 448
ƒ VLAN Range List 449 - 512
ƒ Row Status
AlliedView™-EMS 4.0.1 Device Management Guide Page 262 of 411