Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 134)

Note - The current firmware version does not allow the following parameters to be
configured:
ƒ Connect Retry Interval
ƒ Configured Hold Time
ƒ Configured Keep Alive
ƒ Min AS Origination Interval
ƒ Min Route Advertisement Interval
Path Attributes
Displays the BGP path attributes.
LAN/WAN Menu
From the LAN/WAN menu, you can view and edit information for the LAN/WAN such as
the frame relay and ISDN-related information. The submenus are unavailable if the proper
PICs are not installed.
Bridging
Forwarding Database
Displays the Forwarding Database table as returned by the device.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded for reasons such as lack of memory or the entry's aging timer.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays bridge port information.
Note - The current firmware version returns the value 'NULL' for the Circuit
parameter.
ISDN
Call Details
Displays ISDN call information such as ISDN number and call direction for active
calls.
Note - The Remote Call parameter does not allow input values that contain hyphens.
AlliedView™-EMS 4.0.1 Device Management Guide Page 134 of 411