Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 27)

AlliedView™-EMS 4.0.1 Device Management Guide Page 27 of 411
will always show an SFP image regardless of whether or not an SFP module is physically
present in the slot.
Note
- Status information for port 9 will always be reflected on both the RJ-45 port image
nd the SFP port image regardless of whether it is the RJ-45 or the SFP port that is actually
n
rmware version sets the Port State
arameter of inactive ports to 'blocking'. As a result, expect port images for inactive ports
u, you can view and edit the system information for the device, or log
into the CLI using Telnet.
Displays basic system information, including system name, location, contact and
ription.
rrent firmware version accepts anywhere from 1 up to 64 characters
for the System Contact, System Name and System Location parameters. NULL
Firmwar
Displays firmware version.
Networ
Displays network-related information such as the addresses of the default gateway
e agents.
Manage
Displays the IP address of the management station.
the Trap Destination IP
Address parameters to be configured.
DHCP I
Displays DHCP information including the DHCP System Group and DHCP Timer
up.
Reset
Resets the switch.
Telnet
Starts a Telnet connection to the switch.
a
in operation. However, if Device Manager detects that the established link speed is less tha
1Gbps, only the RJ-45 port image will turn green.
Note
- When Global RSTP is enabled, the current fi
p
to turn yellow in Device Manager.
Agent Menu
From the Agent men
System Info
desc
Note - The cu
values are not accepted.
e Info
k Info
and th
r Address Info
Note - The current firmware version does not allow
nfo
Gro