Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 192)

Note - Valid MIB Set values for the Time Interval parameter should range from 0 to
604800. However, the current firmware version allows the user to enter values in
the range [-9223372036854775808 to 9223372036854775807] inclusive. But
attempting to enter values greater than 999999999 will cause the new value to be
converted to its equivalent wrap-around value; i.e., 9999999990 will become
1410065398, 9999999991 will become 1410065399, and so on.
Note - Valid MIB Set values for the Number of Packets parameter should range from
1 to 4294967295. However, the current firmware version does not allow Device
Manager to display the correct value greater than 2147483647. Attempting to enter
values greater than 2147483647 will cause the new value to be converted to its
equivalent wrap-around value; i.e. 2147483648 will become -2147483648,
2147483649 will become -2147483647, and so on.
Note - The current firmware version only allows the Address parameter to be
configured if the Protocol parameter is set to OSI.
Note - Valid MIB Set values for the Data Pattern parameter should range from 1 to
4294967295. However, the current firmware version does not allow Device
Manager to display the correct value greater than 2147483647. Attempting to enter
values greater than 2147483647 will cause the new value to be converted to the
following values:
ƒ 4286578688 - 4294934527: 8388608 - 16744447
ƒ 4294934528 - 4294967167: 32768 - 65407
ƒ 4294967168 - 4294967295: 128 - 255
Note - Device Manager does not handle objects of type OCTET STRING correctly.
As a result, the Address parameter will not be configurable and will display a
sequence of bytes in hexadecimal format instead of the actual destination of ping
packets.
Ping Statistics
Displays statistics of the Ping polling.
Security Menu
From the Security menu, you can view and edit port access entity information such as the
PAE port information and the Supplicant PAE information.
Port-based Authentication
Authentication Status
Displays the status of the port-based authentication.
PAE Port Info
Standard
Displays standard PAE port information.
AlliedView™-EMS 4.0.1 Device Management Guide Page 192 of 411