Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 142)

Error Statistics
Displays error statistics.
Note - The Ethernet Chip Set, Symbol Errors and Duplex Status parameters are not
applicable to the AT-AR700S series and should be ignored.
Spanning Tree Info
Displays the port's spanning tree parameters.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-
65535] inclusive.
MAU Info
Displays interface-related MAU information for the port.
Note - The MAU Type List Bits and HC False Carriers parameters are not applicable
to the AT-AR700S series and should be ignored.
Note - The MAU Status and Default MAU Type parameters are implemented as
'read-only'.
MAU Negotiation Info
Displays the MAU's auto-negotiation settings and its status.
Note - The following parameters are not applicable to the AT-AR700S series and
should be ignored:
• Capability Bits
• Advertised Bits
• Received Bits
• Remote Fault Advertised
• Remote Fault Received
Note - The Administration Status, Advertised Negotiation Capability and Restart
parameters are implemented as 'read-only'.
Enable
Enables the port.
Disable
Disables the port.
AT-AR700S Series
AlliedView™-EMS 4.0.1 Device Management Guide Page 142 of 411