Allied Telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT - Manual (Page 335)

Note - The following parameters are not applicable to the AT-x900-24X series and
should be ignored:
ƒ Ethernet Chip Set
ƒ Symbol Errors
ƒ Duplex Status
ƒ Rate Control Ability
ƒ Rate Control Status
Spanning Tree Info
Displays the port's spanning tree parameters.
Note - The Path Cost Contribution parameter is not applicable to the AT-x900-24X
series and should be ignored.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-
65535] inclusive.
MAU Info
Displays interface-related MAU information for the port.
Note - The MAU Type List Bits and HC False Carriers parameters are not applicable
to the AT-x900-24X series and should be ignored.
Note - The MAU Status and Default MAU Type parameters are implemented as
'read-only'.
MAU Negotiation Info
Displays the MAU's auto-negotiation settings and its status.
Note - The following parameters are not applicable to the AT-x900-24X series and
should be ignored:
ƒ Capability Bits
ƒ Advertised Bits
ƒ Received Bits
ƒ Remote Fault Advertised
ƒ Remote Fault Received
Note - The Administration Status, Advertised Negotiation Capability and Restart
parameters are implemented as 'read-only'.
Port Trunking
Aggregator Port LIst
Displays Link Aggregation Control information for every Aggregation Port
associated with this device.
Note - Valid MIB Set values for the Actor System Priority and Actor Port Priority
parameters are in the range [0..65535] inclusive.
AlliedView™-EMS 4.0.1 Device Management Guide Page 335 of 411